225
Setting Options Description
Light Source Calibration
(EB-770F/EB-775F)
Run Now
Run Periodically
Last Run
Selects options to perform light
source calibration to maintain the
color balance of the projected
image
Run Now: Select On to start light
source calibration now. Make
sure the projector has been
turned on for at least 30 minutes
for maximum accuracy. You may
not be able to start calibration if
the projector's environmental
temperature is out of range.
Run Periodically: Select On to
perform calibration every 100
hours of usage
Last Run: Displays the date and
time light source calibration was
last performed
Date & Time Date & Time
Daylight Saving Time
Internet Time
Adjusts the projector's date and
time settings
• Date & Time: sets the date
and time on the projector
• Daylight Saving Time:
enables daylight saving time
• Internet Time: updates the
time automatically via an
online time server
Schedule Settings — Schedules projector events to
occur automatically at selected
dates and times
Wireless LAN Power On
Off
Enables or disables wireless
communication
To Next Page
Loading...
Need help?
General
Weight and Dimensions
