95
2. Press the arrow buttons on the remote control or control panel to navigate the screen, and press
Enter to select an option.
1 Selects the source you want to project
A checkmark appears in the upper right corner of the current input source. For most sources,
a preview of the input image appears as a thumbnail.
2 Projects images from two or four input sources simultaneously in a grid format
3 Shares your projected image with other projectors connected to the same network
4 Displays the Connection Guide
You can view steps for different wireless connection methods depending on the devices you
are using, such as smartphones or computers.
5 Lets you select the following common projector settings (these settings may vary depending
on other selected settings):
• Color Mode
• Brightness Level
• Volume
• Geometry Correction (H/V-Keystone and Quick Corner are available)
• Aspect
To Next Page
Loading...
