Epson EMP-X3 User Manual

24
Functions for Enhancing Projection
Once the connection has been made, the mouse pointer can be operated as
follows.
•The USB cable can only be connected to computers
with a standard USB interface. If using a computer
which is running Windows, the computer must have
had a full version of Windows 98/2000/Me/XP Home
Edition/XP Professional installed. If the computer is
running a version of Windows 98/2000/Me/XP Home
Edition/XP Professional that has been upgraded from
an earlier version of Windows, correct operation cannot
be guaranteed.
•It may not be possible to use the mouse function under
some versions of both the Windows and Macintosh
operating systems.
•Some computer settings may have to be changed in
order for the mouse function to be used. Consult the
documentation for the computer for further details.
Moving the mouse pointer Mouse clicks
Drag and drop This is useful for displaying the
previous or next slide in a
PowerPoint slideshow.
Double-click: Press twice in rapid
succession.
Left click Right click
1. Hold down the [Enter] button
and tilt and drag the [ ] button.
2. Release the [Enter] button to
drop at the desired location.
To previous slide
To next slide

Epson EMP-X3 Specifications

General

Display resolution	1024 x 768 pixels
Number of colors	16.78 million colors
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 92 kHz
Contrast ratio (typical)	400:1
Projector native resolution	XGA (1024x768)
Video in	Mini D-sub 15pin x 1
I/O ports	USB B x1, RCA x 1, Mini DIN, Mini D-sub 15pin
Audio input	RCA x 2
Aspect ratio	4:3
Dimensions (WxDxH)	327 x 246 x 86 mm
Power requirements	100 - 240V ±10%, 50 / 60Hz AC
Lamp type	UHE
Lamp power	170 W
Light source type	Lamp
Service life of light source	2000 h
Noise level	30 dB
Power consumption (typical)	240 W
Operating temperature (T-T)	5 - 35 °C
Market positioning	Home cinema

Weight and Dimensions

Weight	2600 g