Epson EMP-X3 User Manual

61
Maintenance
E
Install the new lamp.
Insert the new lamp so that the lamp fits in place correctly and
once it is fully inserted, tighten the two screws.
F
Install the lamp cover.
Slide the lamp cover and tighten the cover fixing screws.
•Install the lamp securely. If the lamp cover is removed,
the lamp turns off automatically as a safety precaution.
Moreover, the lamp will not turn on if the lamp or the
lamp cover is not installed correctly.
•This product includes a lamp component that contains
mercury (Hg). Please consult your state and local
regurations regarding disposal or recycling. Do not put
in the trash.

Epson EMP-X3 Specifications

General

Display resolution	1024 x 768 pixels
Number of colors	16.78 million colors
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 92 kHz
Contrast ratio (typical)	400:1
Projector native resolution	XGA (1024x768)
Video in	Mini D-sub 15pin x 1
I/O ports	USB B x1, RCA x 1, Mini DIN, Mini D-sub 15pin
Audio input	RCA x 2
Aspect ratio	4:3
Dimensions (WxDxH)	327 x 246 x 86 mm
Power requirements	100 - 240V ±10%, 50 / 60Hz AC
Lamp type	UHE
Lamp power	170 W
Light source type	Lamp
Service life of light source	2000 h
Noise level	30 dB
Power consumption (typical)	240 W
Operating temperature (T-T)	5 - 35 °C
Market positioning	Home cinema

Weight and Dimensions

Weight	2600 g