Epson Expression Home XP-5200 Series User Manual

Disconnecting Wi-Fi Direct (Simple AP) Connection
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specic device, disconnect from the device
instead of the printer.
1.
Select
on the printer's home screen.
To select an item, use the
u d l r buttons, and then press the OK button.
2.
Select Wi-Fi Direct.
e Wi-Fi Direct information is displayed.
3.
Select Start Setup.
4.
Select
.
5.
Select Disable Wi-Fi Direct.
6.
Follow the on-screen instructions.
Changing the Wi-Fi Direct (Simple AP) Settings Such as the SSID
When Wi-Fi Direct (simple AP) connection is enabled, you can change the settings from > Wi-Fi
Direct > Start Setup >
, and then the following menu items are displayed.
Change Network Name
Change the Wi-Fi Direct (simple AP) network name (SSID) used for connecting to the printer to your arbitrary
name. You can set the network name (SSID) in ASCII characters that is displayed on the soware keyboard on the
control panel. You can enter up to 22 characters.
In These Situations > Connecting a Smart Device and Printer Directly (Wi-Fi Direct) > Changing the Wi-Fi Direct ( …
100

Epson Expression Home XP-5200 Series Specifications

General

Print Technology	Inkjet
Functions	Print, copy, scan
Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Scan Resolution	1200 x 2400 dpi
Output Capacity	30 sheets
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm
Connectivity	USB, Wi-Fi
Mobile Printing	Apple AirPrint
Paper Sizes	A4, A5, A6, B5, Letter, Legal
Input Capacity	100 sheets
Ink Cartridges	4 individual cartridges (Black, Cyan, Magenta, Yellow)