Settings > Printer Settings
Paper Source Setting:
Paper Setup:
Select the paper size and paper type you loaded in the paper source. You can make Favorite
Paper Settings in paper size and paper type. Select
to return to the last settings you made.
Paper Setup Auto Display:
Select On to display the Paper Setup screen when loading paper in the paper source. If you
disable this feature, you cannot print from an iPhone, iPad, or iPod touch using AirPrint.
Quiet Mode:
Select On to reduce noise during printing, however, this may lower the print speed. Depending on
the paper type and print quality settings you selected, there may be no dierence in the printer's noise
level.
Ink Drying Time:
Select the ink drying time you want to use when performing 2-sided printing. e printer prints the
other side
aer
printing one side. If your printout is smeared, increase the time setting.
PC Connection via USB:
Select Enable to allow a computer to access the printer when connected by USB. When Disable is
selected, printing and scanning that is not sent over a network connection is restricted.
Clear All Settings
Resets the Printer Settings to their defaults.
Network Settings
Select the menus on the control panel as described below.
Settings > Network Settings
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from following and then
follow the instructions on the control panel.
Wi-Fi (Recommended):
Set up or change wireless network settings. Choose the connection method from following and
then follow the instructions on the control panel.
Wi-Fi Setup Wizard:
Makes Wi-Fi settings by entering the SSID and password.
Push Button Setup (WPS):
Makes Wi-Fi settings by Push Button Setup (WPS).
Product Information
>
Settings Menu List
>
Network Settings
163
To Next Page
Loading...
Need help?
General
