EasyManuals Logo

Epson Expression Home XP-5200 Series User Manual

Epson Expression Home XP-5200 Series
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #96 background imageLoading...
Page #96 background image
e default gateway address is correct if you set the printers TCP/IP Setup setting to Manual.
e device that is set as the default gateway is turned on.
Set the correct default gateway address. You can check the default gateway address from the Network Status part
on the network connection report.
Related Information
& “Setting a Static IP Address for the Printer” on page 103
E-12
Solutions:
Check the following.
Other devices on the network are turned on.
e
network addresses (IP address, subnet mask, and default gateway) are correct if you are entering them
manually.
e network addresses for other devices (subnet mask and default gateway) are the same.
e
IP address does not
conict
with other devices.
If still does not connect your printer and network devices
aer
conrming
the above, try the following.
Turn o the wireless router. Wait for about 10 seconds, and then turn it on.
Make network settings again using the installer. You can run it from the following website.
https://epson.sn > Setup
You can register several passwords on a wireless router that uses WEP security type. If several passwords are
registered, check if the rst registered password is set on the printer.
Related Information
& “Setting a Static IP Address for the Printer” on page 103
E-13
Solutions:
Check the following.
Network devices such as a wireless router, hub, and router are turned on.
e TCP/IP Setup for network devices has not been set up manually. (If the printer’s TCP/IP Setup is set
automatically while the TCP/IP Setup for other network devices is performed manually, the printer’s network
may dier from the network for other devices.)
If it still does not work
aer
checking the above, try the following.
Turn o the wireless router. Wait for about 10 seconds, and then turn it on.
Make network settings on the computer that is on the same network as the printer using the installer. You can
run it from the following website.
https://epson.sn > Setup
In These Situations
>
Re-Setting the Network Connection
>
Messages and Solutions on the Network Connection
96

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson Expression Home XP-5200 Series and is the answer not in the manual?

Epson Expression Home XP-5200 Series Specifications

General IconGeneral
Print TechnologyInkjet
FunctionsPrint, copy, scan
Print Resolution5760 x 1440 dpi
Scanner TypeFlatbed
Scan Resolution1200 x 2400 dpi
Output Capacity30 sheets
Print Speed (Black)10 ppm
Print Speed (Color)5 ppm
ConnectivityUSB, Wi-Fi
Mobile PrintingApple AirPrint
Paper SizesA4, A5, A6, B5, Letter, Legal
Input Capacity100 sheets
Ink Cartridges4 individual cartridges (Black, Cyan, Magenta, Yellow)

Related product manuals