Scanning
Scanning Using the Control Panel
Scanning to a Memory Device
You can save the scanned image to a memory device.
1. Insert a memory device into the printer.
2. Place the originals.
3. Select Scan on the home screen.
4. Select Memory Device.
If you attach multiple memory devices to the printer, select the memory device to which the scanned images
are saved.
5. Set items on Scan tab, such as the save format.
❏ BW/Color: Select whether to scan in color or in monochrome.
❏ JPEG/PDF: Select the format in which to save the scanned image.
❏ 2-Sided: Scan both sides of the original.
6.
Select Advanced Settings tab, and then check settings, and change them if necessary.
7. Select Scan tab, and then tap
x
.
Note:
❏ Scanned images are saved in the "001" to "999" folders in "EPSCAN" folder.
❏ e color, size, and border of the scanned image will not be exactly the same as the original.
Related Information
& “Inserting a Memory Card” on page 78
& “Placing Originals” on page 72
Scan Menu Options for Scanning to a Memory Device
B&W/Color:
Select whether to scan in color or in monochrome.
JPEG/PDF:
Select the format in which to save the scanned image.
User's Guide
Scanning
141
To Next Page
Loading...
