Scanning Using WSD
Note:
❏ i s f e a t ure i s o n ly avai l ab l e f o r c om p u t e r s r u nn i n g Win d o w s 1 0 / Wind ow s 8 . 1 / Wi n d ow s 8 / Wi n d o w s 7 / Wi n d o w s Vi s t a .
❏ If you are using Windows 7/Windows Vista, you need to setup your computer in advance using this feature.
1. Place the originals.
2.
Select Scan on the home screen.
3. Select WSD.
4. Select a computer.
5. Tap
x
.
Note:
e color, size, and border of the scanned image will not be exactly the same as the original.
Setting Up a WSD Port
is section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
e
following is necessary to set up a WSD port.
❏ e printer and the computer are connected to the network.
❏ e printer driver is installed on the computer.
1. Turn the printer on.
2. Click start, and then click Network on the computer.
3. Right-click the printer, and then click Install.
Click Continue when the User Account Control screen is displayed.
User's Guide
Scanning
148
To Next Page
Loading...
