Placing Originals
Place originals on the scanner glass or the ADF. Use the scanner glass for originals that the ADF does not support.
You can scan multiple originals and both sides of the originals at the same time with the ADF.
Available Originals for the ADF
Place the originals in the ADF to automatically scan both sides of the originals.
Available Paper Sizes
A4, Letter, Legal
*
Paper Type Plain paper
Paper Thickness (Weight of Paper) 64 to 95 g/m
Loading Capacity A4, Letter: 30 sheets or 3.3 mm
Legal: 10 sheets
* Only single-sided scanning is supported.
To prevent paper jams, avoid placing the following originals in the ADF. For these types of originals, use the
scanner glass.
❏ Originals that are torn, folded, wrinkled, deteriorated, or curled
❏ Originals with binder holes
❏ Originals held together with tape, staples, paper clips, and so on
❏ Originals that have stickers or labels stuck to them
❏ Originals that are cut irregularly or not right angled
❏ Originals that are bound
❏ OHPs, thermal transfer paper, or carbon backs
Placing Originals on the ADF
1. Align the edges of the originals.
2. Open the ADF input tray.
User's Guide
Placing Originals
72
To Next Page
Loading...
