Making Wi-Fi Settings from the Printer
You can make network settings from the printer's control panel in several ways. Choose the connection method
that matches the environment and conditions that you are using.
If you know the information for the wireless router such as SSID and password, you can make settings manually.
If the wireless router supports WPS, you can make settings by using push button setup.
Aer connecting the printer to the network, connect to the printer from the device that you want to use (computer,
smart device, tablet, and so on.)
Make advanced network settings to use a static IP address.
Related Information
& “Making Wi-Fi Settings by Entering the SSID and Password” on page 39
& “Making Wi-Fi Settings by Push Button Setup (WPS)” on page 40
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 41
& “Making Wi-Fi Direct (Simple AP) Connection Settings” on page 42
& “Message on the Network Environment” on page 51
Making Wi-Fi Settings by Entering the SSID and Password
You can set up a Wi-Fi network by entering the information necessary to connect to a wireless router from the
printer's control panel. To set up using this method, you need the SSID and password for a wireless router.
Note:
If you are using a wireless router with its default settings, the SSID and password are on the label. If you do not know the
SSID and password, see the documentation provided with the wireless router.
1. Tap on the home screen.
2.
Tap Wi - Fi (R e c o mm e n d e d ).
If the printer has already been connected by Ethernet, tap Router.
3.
Tap Start Setup.
If the network connection is already set up, the connection details are displayed. Tap Change Settings to
change the settings.
If the printer has already been connected by Ethernet, tap Change to Wi-Fi connection., and then tap Ye s
aer conrming the message.
4. Tap Wi-Fi Setup Wizard.
User's Guide
Network Settings
39
To Next Page
Loading...
Need help?
General
