Printing
Printing from the Print Photos Menu on the Control
Panel
You can print data from a memory device such as memory card or external USB device.
Basic Operations for Printing Photos
1. Load paper in the printer.
2. Insert a memory device into the memory card slot or the external interface USB port of the printer.
If Auto Selection Mode in Guide Functions is turned on, a message is displayed. Check the message and tap
to function index.
3.
Tap Print Photos on the control panel.
4. Tap Print.
5. When a message telling you that loading photos is complete is displayed, tap OK.
6. Select the photo you want to print on the select photo screen.
e selected photo has a check mark and the number of prints (1 initially) on it.
Note:
❏ Tap
at the top right of the screen to display the Select Photo Menu. If you specify a date by using Browse, only
photos of the
specied
date are displayed.
❏ To change the number of prints, tap Single View, and then use - or +. If the icons are not displayed, tap anywhere on
the screen.
7. Tap Print Settings to make paper and print settings.
8. Tap Preview and Print or Proceed to Preview..
9.
Tap Edit to edit the photos as necessary.
10. Enter the number of copies, and then tap
x
.
11. Conrm that printing is complete, and then tap Close.
If you notice print quality problems such as banding, unexpected colors, or blurry images, tap
Troubleshooting to see the solutions.
Related Information
& “Loading Paper in the Paper Cassette 1” on page 61
& “Loading Paper in the Paper Cassette 2” on page 64
User's Guide
Printing
83
To Next Page
Loading...
Need help?
General
