Connecting to an iPhone or iPad (iOS devices) using Wi-Fi Direct
is method allows you to connect the printer directly to an iPhone or iPad without a wireless router. e
following conditions are required to use this function. If your environment does not match these conditions, you
can connect by selecting Other OS Devices. See the related information link below for details on connecting.
❏ iOS 11 or later
❏ Using the standard camera application to scan the QR code
❏ Epson iPrint version 7.0 or later
Epson iPrint is used to print from a smart device. Install Epson iPrint on the smart device in advance.
Note:
You only need to make these settings for the printer and the smart device that you want to connect to once. Unless you
disable Wi-Fi Direct or restore the network settings to their defaults, you do not need to make these settings again.
1. Tap Smartphone connect on the home screen.
2. Tap Start Setup.
3. Tap iOS.
User's Guide
Network Settings
30
To Next Page
Loading...
