Messages Solutions
Access the following or see documentation for
details. Select [Dismiss] after
conrming
it.
See the link below.
“Connecting to a Smart Device” on page 29
Paper settings for XX do not match the Print
Settings. Pull out Paper Cassette 1 or Paper
Cassette 2 to place the following paper. XX XX
Load paper that matches the print settings in the paper cassette, and
then change the paper settings or change the print settings.
If you do not want to display this message from the next time, select
Settings > Printer Settings > Paper Source Setting, and then set
Paper Conguration to O.
The paper size and type set in XX does not
match
specied
Print Settings.
Load paper that matches the print settings in the paper cassette, and
then change the paper settings or change the print settings.
If you do not want to display this message from the next time, select
Settings > Guide Functions, and then set Paper Mismatch to O.
No paper has been loaded that matches the
paper size setting.
Change the print settings according to the paper size loaded in the
paper cassette, or load paper in the paper cassette that matches the
print settings.
If you do not want to display this message from the next time, select
Settings > Guide Functions, and then set Paper Mismatch to O.
Recovery Mode The printer has started in recovery mode because the rmware update
failed. Follow the steps below to try to update the
rmware
again.
1. Connect the computer and the printer with a USB cable. (During
recovery mode, you cannot update the rmware over a network
connection.)
2. Visit your local Epson website for further instructions.
“Updating Applications and Firmware” on page 203
“Technical Support Web Site” on page 256
*1In some print cycles a very small amount of surplus ink may be collected in the ink pad. To prevent ink leakage
from the pad, the printer is designed to stop printing when the pad has reached its limit. Whether and how oen
this is required will vary according to the number of pages you print, the type of material that you print and the
number of cleaning cycles that the printer performs. e need for replacement of the pad does not mean that your
printer has ceased to operate in accordance with its specications. e printer will advise you when the pad
requires replacing and this can only be performed by an authorised Epson Service provider. e Epson warranty
does not cover the cost of this replacement.
*2In some print cycles a very small amount of surplus ink may be collected in the borderless printing ink pad. To
prevent ink leakage from the pad, the product is designed to stop borderless printing when the pad has reached its
limit. Whether and how oen this is required will vary according to the number of pages you print using the
borderless print option.
e
need for replacement of the pad does not mean that your printer has ceased to operate
in accordance with its
specications.
e
printer will advise you when the pad requires replacing and this can only
be performed by an authorised Epson Service provider. e Epson warranty does not cover the cost of this
replacement.
Checking the Printer Status - Windows
1.
Access the printer driver window.
User's Guide
Solving Problems
208
To Next Page
Loading...
Need help?
General
