Menu Options for Settings
Select Settings on the home screen of the printer to make various settings.
Menu Options for Ink Levels
Select the menu on the control panel as described below.
Settings > Ink Levels
Displays the approximate levels of the ink cartridges.
When
is displayed, the ink cartridge is running low. When is displayed, you need to replace the cartridge
as ink is expended.
You can replace ink cartridges or print supply status information from this screen.
Related Information
& “Replacing Ink Cartridges” on page 162
Menu Options for Basic Settings
Select the menus on the control panel as described below.
Settings> Basic Settings
Sound:
Adjust the volume.
Screen Saver:
Select Memory Card Data to display photos as a slideshow when no operations are performed for
about three minutes.
LCD Brightness:
Adjust the brightness of the LCD screen.
Auto Power On:
Select On to turn on the printer automatically when it receives a print or scan job over a USB-
connection or a network connection. To start printing, you need to slide out the output tray. Also,
enabling Auto Power On increases power consumption slightly in standby status when compared to
turning the printer o completely.
Use the Power O Timer setting if you want the printer to automatically turn o when the print or
scan job is nished and a set time period has passed with no operations performed. is is useful
when printing from a remote location such as over the Internet.
User's Guide
Menu Options for Settings
183
To Next Page
Loading...
Need help?
General
