Epson FX-2190 - Online Guides and Utilities

EPSON FX-890/2190 Revision B
PRODUCT DESCRIPTIONS Features 15
Note1: Printing on labels is available only under normal temperature and humidity conditions.
2: The base sheet of labels must be continuous paper.
3: Labels should be inserted from bottom or front entrance.
4: Do not pull out paper from backward.
5: No label paper should be left on the printer when the printer is not used.
6: Do not print on the base sheet of labels.
7: Do not use cut sheet labels.
Note1: Printing on labels is available only under normal temperature and humidity conditions.
2: The base sheet of labels must be continuous paper.
3: Labels should be inserted from bottom or front entrance.
4: Don’t pull out paper from backward.
5: No label paper should be left on the printer when the printer is not used.
6: Don’t print on the base sheet of labels.
7: Don't use cut sheet labels.
Figure 1-1. Label Size
Table 1-13. Labels (FX-890)
FX-890
Bottom/Front Entry Rear Entry
Minimum Maximum Minimum Maximum
Label size See Figure 1-1 below.
-----
Base sheet width
(inch)
(mm)
(4)
101.6
(10)
254
----- -----
Base sheet length
(one page)
(inch)
(mm)
(4)
101.6
(22)
558.8
----- -----
Base sheet
Thickness
(inch)
(mm)
(0.0028)
0.07
(0.0035)
0.09
----- -----
Total thickness
(inch)
(mm)
(0.0063)
0.16
(0.0075)
0.19
----- -----
Label weight
(g/m
2
)
(lb)
64
(17)
-----
Quality Plain paper or the same quality
labels
-----
Table 1-14. Labels (FX-2190)
FX-2190
Bottom/Front Entry Rear Entry
Minimum Maximum Minimum Maximum
Label size See Figure 1-1 below.
-----
Base sheet width
(inch)
(mm)
(4)
101.6
(16)
406.4
----- -----
Base sheet length
(one page)
(inch)
(mm)
(4)
101.6
(22)
558.8
----- -----
Base sheet
Thickness
(inch)
(mm)
(0.0028)
0.07
(0.0035)
0.09
----- -----
Total thickness
(inch)
(mm)
(0.0063)
0.16
(0.0075)
0.19
----- -----
Label weight
(g/m
2
)
(lb)
64
(17)
-----
Quality Plain paper or the same quality
labels
-----