53
Note: The web setup and control features support Microsoft Internet Explorer 11.0 or later, Microsoft
Edge, Google Chrome, and Safari on networks that do not use a proxy server for connection. You
cannot select all of the projector menu settings or control all projector functions using a web browser.
Note: If you set Standby Mode to Communication On in the Extended menu, you can use a web
browser to select settings and control projection even if the projector is in standby mode.
1. Make sure the projector is turned on.
2. Start your web browser on a computer or device connected to the network.
3. Type the projector's IP address into the browser's address box and press the computer's Enter key.
Note: If you attempt to connect to the Epson Web Control screen via a proxy server, the screen will
not be displayed. Make a direct connection to the Epson Web Control screen.
You see the Epson Web Control screen:
4. To control projection remotely, select the Remote option from the Epson Web Control screen.
Note: If you see a log in window, enter your user name and password. (The default user name is
EPSONWEB and the default password is admin.)
To Next Page
Loading...
Need help?
General
