Epson LX-810 User Manual

Interface Boards
6. Insert a screwdriver into the openings on the underside of the
printer. Push the screwdriver up, press the handle of the screw
driver toward the back of the printer to release the clips on the
case.
7. Partially raise the upper case, taking care not to strain the flat
cable attached to the control panel.
Using the Printer Options 5-47

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)