Epson LX-810 User Manual

Replacing the Ribbon
7. Use a pointed object, such as a ball-point pen, to guide the
ribbon into place between the print head and ribbon guide
while you turn the ribbon-tightening knob. Be careful not to
puncture the ribbon.
8. Slide the print head from side to side to make sure that it
moves smoothly. Also make sure the ribbon is not twisted or
creased.
Maintenance 6-7

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)