Epson LX-810 User Manual

Printing
Problem
Solution
Dots are missing in
the printed
characters or
graphics.
A. line of dots is
missing in the
printout.
Ad r"
Dots are missing in
random positions.
ABCD
Printed characters
are not what you
expected.
The typestple or
characters that are
set by the software
cannot he printed.
The print head is damaged. Stop printing
and contact your Epson dealer to have the
print head replaced.
There is either too much slack in the
ribbon or the ribbon has come loose and
gotten caught on something. Stop printing,
turn off the printer, and reinstall the
ribbon cartridge. Refer to 1-8.
The software may not be correctly
installed for your printer. Use th^
program's setup (or install) procedure to
check the printer settings, and reset as
needed.
7-6 Troubleshooting

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)