Epson LX-810

Options
Problem
Solution
Switching between
the cut sheet feeder
and the push tractor
does not work
properly.
The LOAD/EJECT
button is pressed to
load paper, hut the
desired paper type
does not load.
When the paper
release lever position
is changed, the
printer beeps
continuously.
When the
LOAD/EJECT button
is pressed to eject
continuous paper,
the paper jams or
does not fully eject.
The paper release lever may not be in the
proper position. Pull the lever forward to
load continuous paper or push the lever
back to load single sheets. Refer to 5-15, or
5-19.
You may have changed the paper release
lever position while paper was in the paper
path. Remove the paper from the paper
path or return the paper release lever to the
previous position. Refer to 5-14, 5-15, 5-18,
or 5-19. ,
You may have tried to reverse feed too
many pages. Before ejecting the paper,
always tear off the last printed page.
Never press the LOAD/EJECT button rtiore
than twice. Refer to 5-18.
7-26 Troubleshooting