Epson LX-810 User Manual

Options
Problem
Using an optional
interface, the printer
does not operate
properly.
The printer does not
print or the printout
is not what you
expected.
Solution
The interface board may be loose or not
properly connected. Check that the
interface board is correctly inserted into the
connector on the main board. Refer to
5-51, 5-53.
You may not be using the correct interface.
Check the specifications to make sure that
you can use the interface with this printer.
Refer to 5-43.
You may not be using the correct cable.
Make sure that the cable matches the
specifications of the interface.
The DIP switches or jumpers on the
interface board may not be set correctly.
Refer to the interface manual for the
correct settings.
The computer and interface settings may
not match. Match the settings for each
condition.
7-32 Troubleshooting

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)