Epson LX-810 User Manual

Commands A^rranged by Topic
DC3 Deselect Printer
Format:
ASCII code: DC3
Decimal: 19
Hexadecimal: 13
Comments:
Puts the printer into the deselected state until select printer code
(DCl) is received. The printer cannot be reselected with the ON
LINE button.
ESC s Turn Half-speed Mode On/Off
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for n.
1: Mode is turned ON.
0: Mode is truned OFF.
ESC
s n
27 115 n
IB 73 n
ESC < Select Unidirectional Mode (one line)
Format:
ASCII code: ESC <
Decimal: 27 60
Hexadecimal: IB 3C
Comments:
^ Printing is normally bidirectional. This command selects
unidirectional printing for one line only. It is cancelled by a
carriage return. The print head moves to the extreme left (home)
position, and printing takes place from left to right.
Command Summary 9-9

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)