Epson LX-810 User Manual

Commands ^Arranged by Topic
ESC U Turn Unidirectional Mode On/Off
Format:
Comments:
The following values can be used for n:
1: Mode is turned ON. ^
0: Mode is turned OFF.
Text printing is normally bidirectional. This command selects
unidirectional printing for more accurate positioning. ^
ASCII code:
ESC
U n
Decimal: 27
85
n
Hexadecimal: IB
55
n
ESC 8 Disable Paper Out Detection
Format:
ESC 9 Enable Paper Out Detection
Format:
ASCII code: ESC 8
Decimal: 27 56 ^
Hexadecimal IB 38
Comments:
Disables paper out detection. When disabled, the printer does
not stop printing even when it runs out of paper. ^
ASCII code: ESC 9 ^
Decimal: 27 57 ^
Hexadecimal: IB 39 ^
Comments: ^
Enables paper out detection. When paper out detection is
enabled, the printer automatically stops printing when it runs
out of paper. ^
9-10 Command Summary ^

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)