Epson LX-810

Commands Arranged by Topic ^
ESC 2 Select 1/6-inch Line Spacing
Format:
ASCII code: ESC 2
Decimal: 27 50 ^
Hexadecimal: IB 32
Comments:
Sets the line spacing to 1/6 of an inch for subsequent line feed
commands. The '"I" is the character two and not ASCII code 2.
This is the default at power on. ^
ESC 3 Select n/216-inch Line Spacing
Format:
ASCII code:
ESC
3
n
Decimal:
27 51
n
Hexadecimal: IB 33
n
Comments:
Sets the line spacing to n/216 of an inch for subsequent line
feed commands. The "3" is the character three and not ASCII
code 3. This is the value of n must be from 0-255.
BSC A Select n/72-inch Line Spacing
Format:
ASCII code:
ESC
A
n
Decimal: 27 65
n
Hexadecimal: IB 41
n
Comments:
Sets the line spacing to n/72 of an inch for subsequent line feed 0^
commands. The value of n must be from 0-85. ^
9-16 Command Summary ^