Epson LX-810

ESC J
Commands A.rranged by Topic
Perform n/216-inch Line Feed
Format:
ASCII code:
ESC
J
n
Decimal:
27 74 n
Hexadecimal: IB
4A n
Comments:
Advances the paper n/216 of an inch. The value of n must be
from 0-255. this command produces an immediate line feed but
does not affect subsequent line spacing and does not produce a
carriage return.
VT Tab Vertically
Format:
ASCII code: VT
Decimal: 11
Hexadecimal: OB
Comments:
Advances the paper to the next tab setting. If no vertical tabs
have been selected, the paper advances one line.
ESC B Set Vertical Tabs
Format:
ASCII code: ESC B nl n2 0
Decimal: 27 66 nl n2 0
Hexadecimal: IB 42 nl n2 00
Comments:
Sets up to 16 vertical tabs in the current line spacing. Tab
settings are not affected by subsequent changes in line spacing.
/m^ The tab settings are entered as nl, n2, etc., all from 1-255, in
ascending order. The 0 character indicates the end of the
command. All settings are stored in channel 0 (see ESC b). ESC
BO clears the tab settings.
Command Summary 9-17