Epson LX-810

Commands A^rranged by Topic
ESC b Set Vertical Tabs in Channels
Format:
ASCII code: ESC b c nl n2 0
Decimal: 27 98 c nl n2 0
Hexadecimal: IB 62 c nl n2 00
ESC / Select Vertical Tab Channel
Format:
Hexadecimal: IB 2F c
Comments:
Comments:
Functions the same as ESC B, except that the variable c selects a
channel for the vertical tabs, which must be between 0-7.
Therefore, up to eight sets of vertical tabs can be set. The
channels are selected by ESC /.To clear the tabs in channel c ^
use ESC h c 0. ^
ASCII code: ESC / c ^
Decimal: 27 47 c ^
This command is used to select the vertical tab channel, with
the value of c from 0-7. All subsequent VT commands use the
channel selected by this command.
9-18 Command Summary ^