Epson LX-810

Commands A.rranged by Topic
Horizontal motion
BSC 1 Set Left Margin
Format:
ASCII code: BSC 1 n
Decimal: 27 108 n
Hexadecimal: IB 6C n
Comments:
^ Sets the left margin to n columns in the current pitch. This
command clears previous tab settings and all previous characters
in the print line. Use lowercase 1 (for left), not the numeral one.
The minimum space between the margins is the width of one
- double-width 10 cpi character.
BSC Q Set Right Margin
Format:
ASCII code: BSC
Q
n
-
Decimal: 27 81
n
Hexadecimal:
IB 51 n
Comments:
Sets the right margin to n columns in the current size. This
command clears previous tab settings and all previous characters
in the print line. The minimum space between the margins is the
width of one double width 10 cpi character.
Command Summary 9-19