Epson LX-810

Commands Arranged bg Topic ^
BS Backspace
Format:
ASCII code: BS
Decimal: 8
Hexadecimal: 08
ASCII code
ESC e n
Decimal:
27 101
n
Hexadecimal: IB 65
n
s
s
s
Comments:
Prints out data in the print buffer, then moves the print position
one space to the left. Backspacing can be performed up to, but ^
not beyond, the left margin setting. The BS code is also ignored
if ESC a2, or a3 has been sent. If this code is received
immediately after graphics printing, the print position of
subsequent data is moved back to the point at which graphics
printing started. ^
ESC e Set Tab Increments ^
Format:
Comments:
This command sets the horizontal or vertical tab increments.
When n is 0, the horizontal tabs are set at intervals of s spaces.
Maximum values are 21 in 10 cpi, 25 in 12 cpi and 36 in
condensed text modes. When n is 1, the vertical tabs are set to s ^
line feeds.
9-20 Command Summary