Epson LX-810 User Manual

Testing the Printer
5. Press the LOAD/EJECT button to load paper.
LOAD/EJECT
6. Press the ON LINE button to start the self test. A list of DIP
switch settings is printed first, followed by a series of
characters. The self test continues until the paper runs out or
until you press the ON LINE button.
Setting Up the Printer 1-19

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)