Epson LX-810 User Manual

Switching Between Continuous and Single Sheets
d)
CAUTION: Make sure you tear off your printed
document before pressing the LOAD/EJECT button.
Reverse-feeding several pages at a time may result in a
paper jam. This is especially true for narrow paper (less
than 6 inches or 152.4 mm wide).
3. Press the LOAD/EJECT button to feed the continuous paper
backward out of the printer and into the standby position.
The paper is still attached to the tractor but no longer in the
paper path.
LOAD/EJECT
%
CAUTION: If you are using narrow paper less than 6
inches or 152.4 mm wide, you should only press the
LOAD/EJECT button once. Also, do not use this button to
eject labels.
WARNING: Never feed labels backward through the
printer. Labels can easily come off the backing sheet and
jam the printer.
2-16 Paper Handling

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)