Epson LX-810 User Manual

Switching Between Continuous and Single Sheets
4. Push the paper release lever back to the single-sheet position.
This position is marked by the icon shown in the illustration
below.
5. Stand the paper guide upright and move the left edge guide so
it locks in place next to the guide mark.
Paper Handling 2-17

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)