107
Setting Options Description
EDID EDID (HDMI1)
EDID (HDMI2)
Describes the display capabilities of your
projector (if images are not displayed
correctly, you may be able to display them
by changing this setting)
EDID Mode: change this setting as
necessary according to the resolution of the
image
HDR10+: set to Off to correctly display
images when the current input source does
not support HDR10+
HDMI Link Device Connections
HDMI Link
Power On Link
Power Off Link
Adjusts the HDMI Link options that allow
the projector or remote to control HDMI-
connected devices that support the CEC
standard
Device Connections: lists the devices
connected to the HDMI1 and HDMI2 ports
when HDMI Link is enabled
HDMI Link: enables or disables the HDMI
Link feature
Power On Link: controls what happens
when you turn on the projector or a linked
device
• Bidirectional: automatically turns on the
connected device when you turn on the
projector, and vice versa
• Device -> PJ: automatically turns on the
projector when you turn on the
connected device
• PJ -> Device: automatically turns on the
connected device when you turn on the
projector
Power Off Link: controls whether linked
devices are turned off when the projector is
turned off
To Next Page
Loading...