Epson QB1000 - Copying Menu Settings between Projectors

92
• Lens Position: saves your current focus, zoom, and lens shift settings (up to 10 memories); load
the saved settings by pressing the Lens1 or Lens2 button on the remote control
Note: Some slight adjustments may be needed after switching to a different lens position memory.
Note: To clear all saved memories, select Reset Memory Settings.
4. Select one of the following options:
• Save Memory: saves your current settings to memory (10 memories with different names are
available)
Note: A memory name that has already been used is indicated by a blue mark. Saving over a
previously saved memory overwrites the settings with your current settings.
• Load Memory: overwrites your current settings with saved settings
• Erase Memory: erases the selected memory settings
• Rename Memory: renames a saved memory
• Reset: resets the name and settings of a saved memory
5. Press Menu or Esc to exit the menus.
Parent topic: Adjusting Projector Features
Related references
Image Quality Memory Settings - Memory Menu
Copying Menu Settings Between Projectors
After you select menu settings for your projector, you can transfer them to another projector of the same
model.
Note: Copy the projector's settings before you adjust the projected image using the projector's image
adjustment settings. Any saved User's Logo setting on the projector will transfer to the other projector.
Caution: If the copy process fails due to a power failure, communication error, or for any other reason,
Epson will not be responsible for any repair costs incurred.