45
• Firmware Update
• You can only set the following settings using Epson Web Control:
• Monitor Password (up to 16 alphanumeric characters)
• HTTP port (port number used for Web Control except for 80 [default], 843, 3620, 3621, 3625,
3629, 4352, 4649, 5357, 10000, 10001, 41794)
4. Select the option corresponding to the projector function you want to control.
Parent topic: Monitoring and Controlling the Projector
PJLink
PJLink was established by the JBMIA (Japan Business Machine and Information System Industries
Association) as a standard protocol for controlling network compatible projectors as part of their efforts to
standardize projector control protocols. The projector complies with the PJLink Class2 standard
established by the JBMIA. The port number used for the PJLink search function is 4352 (UDP). You
need to configure the network settings before you can use PJLink. It complies with all commands except
for the following commands defined by PJLink Class2 and confirmed by the PJLink standard adaptability
verification.
Non-compatible commands:
• Image muting set - AVMT 11
• Audio muting set - AVMT 21
Input ports and corresponding input source number:
• HDMI1 - 32
• HDMI2 - 33
Manufacturer name displayed for "Manufacture name information query": EPSON
Model name displayed for "Product name information query":
• EPSON QB1000B
• EPSON QB1000W
For additional information, visit the Epson website and search for your product's support page.
Parent topic: Monitoring and Controlling the Projector
ESC/VP21 Commands
You can control the projector from an external device using ESC/VP21.
To Next Page
Loading...