82
Adjusting the Color Convergence (Panel Alignment)
Adjusting the Color Tone (Color Uniformity)
Parent topic: Adjusting Projector Features
Using Frame Interpolation
You can use the projector's Frame Interpolation feature to smooth fast-moving video by comparing
consecutive image frames and inserting an intermediate image frame between them.
Note: This feature is only available when Image Processing is set to Fine in the projector's Signal I/O
menu and 4K 100/120Hz signals are not being projected.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Frame Int button on the remote control.
Note: You can also access this setting from the projector's Image menu.
To Next Page
Loading...