Epson QB1000 - Connecting to an HDMI Video Source

28
Parent topic: Setting Up the Projector
Related references
Installation Settings - Installation Menu
Connecting to an HDMI Video Source
If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable.
The HDMI connection provides the best image quality.
Caution: Do not turn on the video source before connecting it to the projector. Doing so could damage
the projector.
Note:
• When projecting images at 4K 120Hz, use an HDMI 2.1 rated cable (ultra-high speed). If you use an
incompatible cable, images may not be displayed correctly. You can try correcting the images by
changing the EDID Mode setting in the projector's Signal I/O menu.
• If the port on the device you connect has an unusual shape, use the cable supplied with the device or
an optional cable to connect to the projector.
• The cable differs depending on the output signal from the connected video devices.
• Some video devices are capable of outputting different types of signals. See your video device manual
to confirm what type of signals can be output.
1. Connect the HDMI cable to your video source's HDMI output port.