Epson QB1000 - Projector Light Source Specifications; Remote Control Specifications

155
Keystone correction angle ± 30º vertical/horizontal
Service port compatibility USB 1.1 and 2.0 compliant for service and firmware update (USB
Mini-B cable)
USB-A port compatibility USB 1.1 and 2.0 compliant for connecting a streaming device,
saving error log files, batch settings, and firmware update with 5V/2A
power supply
Opt.HDMI port compatibility USB 1.1 and 2.0 compliant for an optical HDMI cable with 5V/300mA
power supply only (no USB function)
Trigger Out port 12V (200mA maximum)
Mono cable: tip and sleeve (monaural 2-pin), signal tip trigger + 12V
DC, sleeve GND
Stereo (TRS) cable: signal tip trigger + 12V DC, ring not connected,
sleeve GND
Parent topic: Technical Specifications
Projector Light Source Specifications
Type Laser diode
Light source output power Up to 126 W
Wavelength 449 to 461 nm
Light source life Up to about 20,000 hours
Note: Turn off this product when not in use to prolong the life of the projector. Laser life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
Parent topic: Technical Specifications
Remote Control Specifications
Reception range 32 feet (10 m)
Batteries Two (2) alkaline or manganese AA
Parent topic: Technical Specifications