52
Adjusting the Image Position Using Lens Shift
If you cannot install the projector directly in front of the screen, you can adjust the position of the
projected image using the lens shift feature.
Caution: Do not put your finger in the moving parts of the projector's lens or you may be injured.
1. Turn on the projector and display an image.
2. Press the Lens button on the control panel or remote control.
3. Press the Lens button repeatedly until Adjust Lens Shift appears on the screen.
4. Press the arrow buttons on the remote control or the control panel to adjust the position of the
projected image as necessary.
To Next Page
Loading...