47
Using Basic Projector Features
Follow the instructions in these sections to use your projector's basic features.
Turning On the Projector
Turning Off the Projector
Selecting the Language for the Projector Menus
Adjusting the Image Height
Adjusting the Image Position Using Lens Shift
Image Shape
Resizing the Image with the Zoom Feature
Focusing the Image with the Lens Button
Remote Control Operation
Selecting an Image Source
Projection Modes
Image Aspect Ratio
Color Mode
Adjusting Image Sharpness
Adjusting the Projector's Brightness Level
Turning On Dynamic Contrast
Adjusting the Color Temperature
Adjusting the RGB Offset and Gain
Adjusting Gamma
Adjusting the Hue, Saturation, and Brightness
Turning On the Projector
Turn on the projector before you turn on the computer or video equipment you want to use.
Note: When powering on the projector for the first time, the initial setup wizard is displayed. Use the
arrow and Enter buttons on the control panel or remote control to set the focus, projection mode, and
language. The projector's menu screens are displayed in black by default. You can change the color
theme using the Menu Color setting in the Display menu.
1. Connect the computer or video equipment you want to use to one of the projector's HDMI ports, if
necessary.
To Next Page
Loading...