Epson QB1000 - Adjusting the Color Temperature; Adjusting the RGB Offset and Gain

71
2. Press the Menu button.
3. Select the Image menu and press Enter.
4. Select the Dynamic Contrast setting, choose one of the following options, and press Enter:
• Normal to adjust brightness at the standard speed.
• High Speed to adjust brightness as soon as the scene changes.
5. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Adjusting the Color Temperature
You can change the overall color tone if the image contains a bluish or reddish tone.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Image menu and press Enter.
4. Select White Balance and press Enter.
5. Select Color Temp. and press Enter.
6. Use the left and right arrow buttons to adjust the color temperature. Higher values increase the blue
tint, and lower values increase the red tint.
Note: The temperature range is from 3200 K to 10000 K for the Natural color mode, or 0 to 13 for
other color modes. Press the Default button on the remote control to return to the default setting.
7. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Adjusting the RGB Offset and Gain
You can adjust the brightness of darker and brighter areas of the image by adjusting the Offset and
Gain settings for the individual image colors.