83
3. Select the level of interpolation and press Enter.
4. Press Menu or Esc to exit the menus.
Note: If your resulting images contain noise, turn off the Frame Interpolation setting.
Parent topic: Using Advanced Image Adjustment Features
Related references
Input Signal Settings - Signal I/O Menu
Image Quality Settings - Image Menu
Creating Image Presets
You can quickly optimize your projected image by selecting image adjustment settings and saving them
as a preset you can reuse later. You can save up to five presets.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Image Enh button on the remote control.
Note: You can also access this setting from the projector's Image menu.
To Next Page
Loading...