74
6. If you want to make finer adjustments, select Custom and press Enter.
7. Press the left or right arrow button to select the tone you want to change, then press the up or down
arrow button to adjust the tone and press Enter.
Note: Select Reset to reset the Gamma settings.
8. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Related references
Image Quality Settings - Image Menu
Adjusting the Hue, Saturation, and Brightness
You can adjust the hue, saturation, and brightness settings for individual image colors.
Note: These settings should be set by a professional color calibrator using specialized color calibration
tools in a controlled lighting environment.
1. Turn on the projector and switch to the image source you want to use.
To Next Page
Loading...
