109
Setting Options Description
Test Pattern Display Position
Color Isolation: R
Color Isolation: G
Color Isolation: B
Displays a test pattern to assist in
focusing and zooming the image
and correcting image shape
The color isolation options let you
display the selected color
component of the projected image.
These settings should be set by a
professional color calibrator using
specialized color calibration tools in
a controlled lighting environment.
Projection Front
Front/Ceiling
Rear
Rear/Ceiling
Selects the way the projector faces
the screen so the image is oriented
correctly
Geometry Correction H/V-Keystone
Quick Corner
Point Correction
Adjusts image shape to rectangular
(horizontally and vertically)
H/V Keystone: lets you manually
correct horizontal and vertical sides
Quick Corner: select to correct
image shape and alignment using
an on-screen display
Point Correction: select to divide
the projected image into a grid and
correct distortion by moving a
selected point
Blanking Top
Bottom
Left
Right
Hides the edges of the screen if
there is noise from the input signal
To Next Page
Loading...