118
Setting Options Description
Network Settings Projector Name
Web Control Password
Monitor Password
Wired LAN
Projector Control
Configures your network settings
Projector Name: enters a name to
identify the projector over the network
Web Control Password: sets a
password to use when accessing the
projector over the network (the user
name is EPSONWEB and there is no
default password)
Monitor Password: sets a password
for performing plain text authentication
for command communication
Wired LAN: configures IP settings
Projector Control: selects settings for
controlling the projector over a network
(PJLink, AMX Device Discovery,
Control4 SDDP)
Reset Network Settings — Resets all settings on the Network
menu to their default values
Note: Any passwords set in the
Network menu are reset and you have
to set them again.
Parent topic: Adjusting the Menu Settings
Related references
Projector Control Settings
To Next Page
Loading...