60
3. Select the Installation menu and press Enter.
4. Select the Geometry Correction setting and press Enter.
5. Select the Point Correction setting and press Enter.
Note: If you see a confirmation message, select Yes and press Enter.
6. Select Point Correction again and press Enter.
Note: For fine tuning, select Quick Corner to roughly correct the shape and size of an image and
then select Point Correction to adjust them more precisely.
You see a grid on the projected image.
Note: If you want to change the color of the grid lines, select the Pattern Color setting and select a
color.
7. Select Point Correction, then select the grid size.
To Next Page
Loading...