78
2. Select the HDMI Link setting and press Enter.
3. Select On and press Enter.
4. Select Device Connections and press Enter.
5. Select the device you want to control and project images from and press Enter.
Note: A linked device is indicated with a blue mark. The device name is blank if it cannot be
acquired.
6. Press Esc to return to the previous menu.
7. Select the following HDMI Link options as necessary:
• Power On Link: Select what happens when you turn on the projector or linked device. Select PJ -
> Device or Bidirectional to turn the linked device on when the projector is turned on, or Device -
> PJ or Bidirectional to turn the projector on when the linked device is turned on.
• Power Off Link: Select whether linked devices are turned off when the projector is turned off. This
option only works when the connected device's CEC power link function is enabled.
Note: Some linked devices and their functions may not operate, even if they meet the HDMI CEC
standard. See the device's documentation for more information.
8. Press Menu or Esc to exit the menus.
Parent topic: Adjusting Projector Features
Related references
Input Signal Settings - Signal I/O Menu
To Next Page
Loading...