112
A
Adjust the head height, and then set the print start positions (X and Y positions).
N"Adjusting the Height of the Print Head" on page 45
B
Make vertical adjustments.
Press [Print the Adjustment Pattern] to print the adjustment pattern.
The "0" line (the horizontal line in the red box) is straight, which is normal.
If the "0" line is not straight but the "+1" line is straight, for example, add "+1" to the original number
on the screen, and then enter it. When you have finished checking the pattern for each print head
(H1 to H8) and entering the values on the screen, press [Register].
To Next Page
Loading...
