29
Basic Operations
Getting Started
Read the following before performing any operations.
N"Notes on Handling" on page 23
1
Make sure there is nothing on the media table.
2
Turn the power switch on the front of the printer to turn on the printer.
3
Press the Power on ( ) button to begin initializing the printer.
4
Wait for a while, and then check that the numbers (upper numbers) displayed on the
two temperature controllers on the front of the printer have reached "35" and "45"
respectively.
The upper number is the current temperature and the lower number is the set temperature.
35 is the temperature of the plates around the print head, and 45 is the temperature of the sub ink tank.
The time it takes for each temperature to reach the set temperature depends on factors such as the room
temperature.
To Next Page
Loading...
