36
If your printout is faint or
has gaps in the image . . .
■
Your print head nozzles may
be clogged. Run a cleaning
cycle (see page 19).
■
Make sure your paper isn’t
damaged, old, or dirty. Also,
make sure you put the paper
in correctly (the printable
surface should be face up).
You may need to put a new
stack of paper in the feeder.
If your printout has missing
colors, or if the colors are
wrong . . .
■
Make sure the Ink option is
set to Color.
■
Your print head nozzles may
be clogged. Run a cleaning
cycle (see page 19).
■
Make sure the ink cartridges
aren’t low on ink. If either ink
out light is flashing, or if the
cartridge is old, replace it (see
page 22).
■
Try using the Automatic mode
setting, or choose a different
setting in the Custom Settings
drop-down list (see page 17).
■
Remember that your monitor
and printer use different
technologies to represent
colors, so your printout cannot
exactly match the colors you
see on your monitor.